Sharp Single BS1K2EL
Technische Daten
General Specifications
Input component Feedhorn
Receiving frequency rage 10.7 - 11.7 GHz (Low Band)
11.7 - 12,75 GHz (High Band)
Local oscillation frequency 9.75 GHz (Low Band)
10.60 GHz (High Band)
Output frequency 950 - 1950 MHz (Low Band)
1100 - 2150 MHz (High Band)
Output component F-type female connector (with water-proof)
Nominal output impedance 75 Ohm
Supply voltage and control signals 11.5 - 19 V
continous 22 KHz (ñ 4 KHz)
Power supply system IF output overlapping system
Weight 90 ñ 25 g
Ambient Conditions
Operating temperature -20øC - +60øC
Storage temperature -20øC - +60øC
Humidity 5 % - 95 % RH
Ambient pressure 1010 ñ 150 hPa
Achtung:
Beim F-Stecker, der aufgedreht wird, muss auf die korrekte Abisolierung des Kabels geachtet werden. Hierbei sollte der Innenleiter nicht dnner als 0,8 mm (2) und die Abisolierl?nge nicht mehr als 5 - 9 mm (1) betragen.
Electrical Characteristics
Item Specification Condition
Operating Frequency Band
Input Frequency min. 10.70 GHz, max. 11.70 GHz
min. 11.70 GHz, max. 12.75 GHz Low-Band
High-Band
Output Frequency min. 950 MHz, max. 1950 MHz
min. 1100 MHz, max. 2150 MHz Low-Band
High-Band
Conversation gain typ. 58 dB Center Freq. at Each Band
Gain Frequency
Characteristics typ. 7.0 dBpp
typ. 7.0 dBpp
typ. 1.0 dBpp Low-Band
High-Band
Within any 26 MHz segment
L.O. Frequency and drift
L.O. Frequency typ. 9.75 GHz
typ. 10.60 GHz Low-Band
High-Band
Drift associated with Temperature change typ. ñ 3 MHz at -20øC - + 60øC
L.O. Phase Noise typ. -55 dBc / Hz
typ. -80 dBc / Hz
typ. -100 dBc / Hz at 1 KHz Offset
at 10 KHz Offset
at 100 KHz Offset
1 dB output gain typ. 0 dBm
Cross-Polar Discrimination typ. 25 dB
Supply Voltage min. 11.5 V, max. 14.0 V
min. 16.0 V, max. 19.0 V Ca: Vertical Polarization
Cb: Horizontal Polarization
High-Band selection*
Switching Range min. 18.0 KHz, typ. 22.0 KHz, max. 26.0 KHz
min. 400 mVpp, typ. 600 mVpp, max. 800 mVpp
min. 11.5 V, max. 19.0 V Rectangular pulse Frequency
Rectangular pulse Amplitude
DC Offset
False Triggering of Pulse
(Low-Band selection
Switching Range) max. 100 KHz
max. 50 mVpp
min. 11.5 V, max. 19.0 V Any Pulse Frequency
Any Pulse Amplitude
DC Offset
Current Consumption typ. 95 mA, max. 120 mA
Wichtiger Hinweis:
* Control Signal Characteristics
High-Band selection Low-Band selection
Frequency: 18 KHz = fo = 26 KHz DC = fo = 100 KHz
Amplitude: 400 mV(pp) = Amplitude = 800 mV(pp)